Surface Treatment with Ozone
Case Summary
Hollow roto-molded and sandwich construction products can be difficult to bond internally, especially when foam must adhere to the inside surface.
With Tantec’s OzoneTEC system, ozone activates the interior surface before foam injection, improving adhesion without exotic treating gases.
Result:
✓ Improved foam adhesion
✓ Treats interior surfaces
✓ Flexible product setup
Conclusion:
A compact ozone solution for reliable internal surface treatment.
How OzoneTEC improves foam adhesion inside sandwich constructions
Tantec has developed its OzoneTEC system to treat the inside of products such as surfboards, coolers, ice boxes, jacket pipes, small boats etc. – products that consist of fiberglass on the outside and foam on the inside – also called sandwich construction.
For one specific customer in the boat industry the task was to improve the adhesion of polyurethane foam to the inside of the fiberglass shell. Without treatment the foam will harden but not stick to the inside of the boat shell.
The OzoneTEC produces ozone, which is blown into the shell and is left inside for a while before it is sucked out again. Thereafter the polyurethane foam is injected. It then hardens and adheres to the inside of the shell.
Key features of OzoneTEC
- Ability to treat interior of roto-molded parts
- Higher surface energy levels achieved compared to stock resins
- On demand treating
- Flexible settings to allow for treatment of various product sizes and dimensions
- Small footprint
- No exotic treating gases required
OzoneTEC treatment of roto-molded parts
Roto-molded parts are typically hollow thermoplastic parts. The resin is heated and melted, and by rotating the mold the resin fills the mold cavity creating the part with a hollow inside. Many of these parts require foam insulation for improving thermal properties and rigidity of the parts.
Continuous rotation of the mold during the process ensures uniform thicknesses of the walls. The OzoneTEC plays a key role in helping to activate the inside surface of the part to improve adhesion.
An OzoneTEC system typically consists of generator, HV-transformer, control box, compressed air-system and a customized frame. OzoneTEC can be installed as an in-line process or as a standalone solution.