Plasma Treaters

PlasmaLINE

PlasmaTEC-X

ProfileTEC

RotoVAC

SpinTEC

SpinTEC30

VacuTEC

VacuTEC 2020

VacuTEC 5050

VacuTEC 8080

VacuTEC 100100

VacuTEC+ COAD

VacuLINE

OzoneTEC

ZeroNOxTEC

Corona Treaters

BottleTEC

CableTEC

FoamTEC

HV-X series

LabelTEC

LabTEC-X

NeedleTEC

PipeTEC

RotoTEC-X

SheetTEC

SpotTEC

SyrinTEC

Quality Monitoring

LeakTEC

MonTEC

Dyne Test

Tantec LeakTEC

LeakTEC – Non-Destructive Micro-Leak Detection

LeakTEC provides automated, non-destructive testing of non-conductive single-layer products. It detects pinholes below 3 microns, delivers pass/fail signals and supports full process control and traceability every cycle.

Plasma etch

MonTEC – Real-Time Treatment Monitoring

MonTEC monitors discharge performance from each electrode in Tantec corona and plasma systems. It provides real-time treatment data, full traceability and easy transfer to a main PLC or data-logging device in production.

Peter marketing

Dyne Test – Fast Surface Energy Measurement

Tantec DyneTEC test inks provide a quick process for measuring surface energy and wettability. The result helps verify whether a material is ready for reliable printing, coating, gluing or bonding for consistent results.

Tantec PlasmaLINE close up

PlasmaLINE – Inline Vacuum Plasma Treatment

PlasmaLINE is a customized inline vacuum plasma system for medical devices. It delivers fast, uniform and repeatable surface treatment in 10–30 seconds, improving adhesion, biocompatibility and final product performance.

Tantec Plasmatec-x

PlasmaTEC-X – Atmospheric Plasma Treatment

PlasmaTEC-X is a compact atmospheric plasma system for fast, uniform surface treatment. It integrates easily into production lines or robot cells and improves adhesion for gluing, printing, coating and painting in-line.

Tantec ProfileTEC open

ProfileTEC – Plasma Treatment of EPDM Profiles

ProfileTEC provides plasma treatment of automotive EPDM profiles before flocking or slip-coating. Customized with one or more treatment heads, it improves adhesion at line speeds of up to 40 m/min for better output.

Tantec RotoVAC front

RotoVAC – Vacuum Plasma Treatment in a Drum

RotoVAC treats small injection-moulded parts in a rotating drum inside a vacuum chamber. Rotation exposes the entire surface of every part, delivering consistent plasma treatment without jigs or complex handling systems.

Tantec SpinTEC front

SpinTEC – Rotary Atmospheric Plasma Treatment

SpinTEC uses two rotating PlasmaTEC-X nozzles for uniform atmospheric plasma treatment with minimal heat impact. Treatment width can be customized from 40–150 mm, with speeds of up to 10 m/min for reliable inline output.

Tantec SpinTEC30 side

SpinTEC30 – Compact Rotary Plasma Treatment

SpinTEC30 is a compact, lightweight rotary plasma system with a 30 mm treatment width. Its belt-free direct motor delivers adjustable speeds from 70–2800 rpm and working speeds of approximately 25 m/min with less upkeep.

Tantec VacuTEC5050 front open

VacuTEC – Fast and Uniform Vacuum Plasma

VacuTEC provides uniform vacuum plasma treatment of injection-moulded parts. Available with one or more trays, it improves adhesion before coating, gluing, painting and printing, with cycle times of 2–120 seconds.

Tantec VacuTEC2020 right open door

VacuTEC 2020 – Compact Vacuum Plasma Treater

VacuTEC 2020 is a compact vacuum plasma treater with a 200 x 200 mm tray. It delivers uniform treatment of injection-moulded parts and improves adhesion before coating, gluing, painting or printing with repeatable results.

Tantec VacuTEC5050 side

VacuTEC 5050 – Versatile Vacuum Plasma Treater

VacuTEC 5050 provides fast and uniform vacuum plasma treatment of injection-moulded parts. Its two shelves offer an effective treatment area of 500 x 500 mm, with standard and customized systems available on request.

VacuTEC 8080 Plasma etching

VacuTEC 8080 – Large Vacuum Plasma Treater

VacuTEC 8080 features an 800 × 800 mm treatment area and delivers fast, uniform vacuum plasma treatment. Standard or customized configurations improve adhesion before coating, gluing, painting and printing.

Peter marketing

VacuTEC 100100 – Large-Capacity Vacuum Plasma

VacuTEC 100100 features a 1000 × 1000 mm treatment area for uniform vacuum plasma treatment. Telescopic shelves simplify loading, while customized configurations adapt the system to your process.

VacuTEC COAD 1

VacuTEC+ COAD – Precision Plasma Coating

VacuTEC+ COAD combines vacuum plasma cleaning with precursor activation to create an ultra-thin reactive layer. It delivers strong, stable adhesion on challenging materials without solvents, chemicals or primer at scale.

Tantec VacuLINE side

VacuLINE – Automated Inline Vacuum Plasma

VacuLINE is a customized vacuum plasma system for fully automated inline production. It delivers fast, uniform and repeatable treatment of injection-moulded parts before coating, gluing, painting or printing every cycle.

Tantec OzoneTEC front

OzoneTEC – Internal Treatment of Hollow Parts

OzoneTEC treats the inside of hollow rotomoulded parts such as coolers, boats and jacket pipes. Ozone activates the inner surface before PUR foam injection, improving lasting adhesion, insulation and structural strength.

Front view of the enclosed ZeroNOxTEC NOx reduction system

ZeroNOxTEC – Plasma Treatment with Less NOx

ZeroNOxTEC reduces NOx emissions from atmospheric plasma treatment by up to 99%. The plug-and-play system improves treatment width and efficiency, reduces ventilation demand and can extend treatment shelf life over time.

Tantec BottleTEC vertical electrodes open

BottleTEC – 360° Surface Treatment of Bottles

BottleTEC provides complete, uniform corona treatment of plastic bottles and cylindrical containers. It improves adhesion of labels, inks and coatings and integrates into high-speed production lines in your process.

Tantec CableTEC

CableTEC – 360° Corona Treatment of Cables

CableTEC provides high-speed corona treatment of cable insulation made from PE, PP, PTFE and other polymers. The inline system improves adhesion of printing inks and coatings at speeds up to 600 m/min.

Tantec FoamTEC front

FoamTEC – Corona Treatment of Foam and Board

FoamTEC delivers uniform corona treatment of foam and boards up to 50 mm thick. Available for single- or dual-sided treatment.

Tantec HV X

HV-X Series – Advanced Plasma Power Generators

The HV-X series powers corona and plasma surface treatment systems with outputs of 200, 1000 or 2000 W and 2–80 kV. It supports PLCs, RTU Modbus and bus connectivity for flexible integration into modern production lines.

LabelTEC

LabelTEC – Corona Treatment of Narrow Web

LabelTEC treats conductive and non-conductive narrow webs to improve adhesion of inks, glues and coatings. It provides single- or dual-sided corona treatment across widths of 100–500 mm at line speeds of up to 150 m/min.

Tantec LabTEC X side

LabTEC-X – Corona Treatment for Laboratories

LabTEC-X is a manual bench-top corona system for R&D, testing and proof-of-concept work. It treats small three-dimensional polymer parts and films, providing precise control in laboratory settings for reliable daily use.

NeedleTEC

NeedleTEC – Corona Treatment of Needle Hubs

NeedleTEC delivers inline corona treatment of plastic needle hubs to improve bonding and prevent leakage. It reaches recessed areas, supports high-speed assembly lines and can include electrode surveillance as an option.

Tantec PipeTEC front

PipeTEC – Internal Corona Treatment of Pipes

PipeTEC treats and cleans the entire inner surface of jacket pipes before PUR foam insulation. Integrated into extrusion lines, it improves adhesion, prevents air pockets and supports reliable pipe performance over time.

Tantec RotoTEC X front cover open

RotoTEC-X – Corona Treatment of 3D Parts

RotoTEC-X provides complete and uniform inline corona treatment of three-dimensional injection-moulded parts. Rotating electrodes improve adhesion before coating, printing, gluing or painting with precise output control.

Tantec SheetTEC side

SheetTEC – Corona Treatment of Sheets and Plates

SheetTEC provides single- or double-sided corona treatment of sheets and plates from 50–2000 mm wide. It improves adhesion and can be delivered as a stand-alone unit or integrated conveyor system for flexible production.

Tantec SpotTEC front

SpotTEC – Flexible Corona Treatment of 3D Parts

SpotTEC uses low-frequency discharge for targeted corona treatment of profiles, cables and moulded plastic parts. Its compact electrode head integrates easily into production lines without a counter electrode on demand.

SyrinTEC inside 1 1 e1692794898784

SyrinTEC – 360° Corona Treatment of Syringes

Depending on the application, SyrinTEC provides internal or external corona treatment of PP and PE syringe barrels before printing or coating, improving adhesion on the treated surface.

ZeroNOxTEC

Plasma Treatment with reduced NOx-emissions

Front view of the enclosed ZeroNOxTEC NOx reduction system

ZeroNOxTEC cabinet open, showing the membrane, pneumatic components and controller

ZeroNOxTEC
Plasma Treatment with reduced NOx-emissions

Request a quote

ZeroNOxTEC product description

Atmospheric plasma treatment has long been known as a versatile and effective method for improving material surfaces across various industries. However, one issue has been the generation of NOx emissions, which include nitrogen oxide, nitrogen dioxide and nitrogen trioxide.

The reduction and filtering of NOx emissions has traditionally been done by large and costly ventilation systems. The changes in environmental impacts are making it more important to find a new and better solution to reduce NOx emissions.

ZeroNOxTEC is an innovative solution in surface treatment, offering a revolutionary approach to reducing NOx emissions.

Developed to combat the emissions associated with plasma treatment, this technology has many benefits:

NOx emission prevention:

ZeroNOxTEC achieves an impressive 99% reduction in NOx emissions.

Improved treatment results:

By eliminating NOx emissions, ZeroNOxTEC improves the efficiency of plasma treatment. Resulting in better and wider surface treatment.

Extended shelf life:

Depending on the material being treated, ZeroNOxTEC extends the shelf life of treated products.

Plug and Play installation:

ZeroNOxTEC offers seamless integration and is a plug-and-play solution that simplifies implementation.

By reducing NOx emissions internally, ZeroNOxTEC reduces dependence on venting system, optimizing energy efficiency and reducing operational costs.

Equipped with complete monitoring features and visual indicators, ZeroNOxTEC provides real-time feedback, ensuring optimal performance and safe processing.

With its unrivaled ability to reduce NOx emissions and a range of benefits, this innovative technology sets a new standard for efficiency, sustainability and safety.

Jonas Service Tantec

Ask us a question

Standard ZeroNOxTEC

This product is manufactured as a standard machine to match common production requirements. It offers a proven configuration with defined footprint, treatment concept and machine interface, making it easy to integrate into industrial production.

Customized ZeroNOxTEC

This product can be customized to fit your production. Tantec can adapt the solution to your part geometry, process requirements and production flow, including footprint, cycle time, chamber size, part capacity and machine interface.

Video

ZeroNOxTEC technical specifications

Technical Specifications	ZeroNOxTEC
Main supply voltage and frequency	120 - 230 VAC (± 10%) 50 - 60 Hz (Universal power input)
Power	50VA
Dimension, mm (L x W x H)	280 x 500 x 1200 (1328 including feets)
Weight, kg	1 membrane: 74kg - 2 membranes: 75kg (Including feets)
Maximum number of Plasma systems per ZeroNOxTEC with one membrane	2 Plasma systems
Maximum number of Plasma systems per ZeroNOxTEC with two membranes	4 Plasma systems
Compressed air supply	Minimum 6 bar dry and clean (Tantec recommends 7 bar or higher)
Compressed air connection	OD 8 mm (Quick connection)
Air consumption, liter formaximum 2 Plasma systems	162 to 207 ltr/min
Air consumption, liter for maximum 4 Plasma systems	Air consumption, liter for maximum 4 Plasma systems
Mains cable length	300 mm

FAQ

What is ZeroNOxTEC used for?

ZeroNOxTEC is a solution designed to reduce NOx emissions during surface treatment.

How does ZeroNOxTEC work?

ZeroNOxTEC reduces NOx emissions directly inside the atmospheric plasma process, close to the source.

Can ZeroNOxTEC be integrated into production?

Yes. ZeroNOxTEC can be integrated with plasma treatment setups in industrial production. This makes it suitable for both new production concepts and upgrades of existing processes.

Why is ZeroNOxTEC needed?

Atmospheric plasma can generate NOx emissions, which normally require large ventilation or filtering systems.

What are the main benefits?

It reduces NOx emissions by up to 99%, supports a cleaner process and helps lower dependency on external ventilation.

Does ZeroNOxTEC improve the treatment process?

Yes. By reducing NOx emissions, ZeroNOxTEC supports a more stable and controlled plasma treatment process.

Is ZeroNOxTEC easy to install?

Yes. ZeroNOxTEC is designed as a plug-and-play solution for easy integration.

Is ZeroNOxTEC an environmentally friendly solution?

Yes. By reducing NOx emissions by up to 99%, ZeroNOxTEC supports a cleaner and more sustainable plasma treatment process.

Is ZeroNOxTEC available as both OEM and standard version?

Yes. ZeroNOxTEC is available as both an OEM solution for integration into existing systems and as a standard version for easier implementation.