No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Plasma Treaters
PlasmaLINE - medical
PlasmaTEC-X
ProfileTEC
RotoVAC
SpinTEC
SpinTEC30
VacuTEC
VacuTEC 2020
VacuTEC 5050
VacuTEC 8080
VacuTEC 100100
VacuTEC+ COAD
VacuLINE
OzoneTEC
ZeroNOxTEC
Corona Treaters
BottleTEC
CableTEC
FoamTEC
HV-X series
LabelTEC
LabTEC-X
NeedleTEC
PipeTEC
RotoTEC-X
SheetTEC
SpotTEC
SyrinTEC
LeakTEC – Non-Destructive Micro-Leak Detection
LeakTEC provides automated, non-destructive testing of non-conductive single-layer products. It detects pinholes below 3 microns, delivers pass/fail signals and supports full process control and traceability every cycle.
MonTEC – Real-Time Treatment Monitoring
MonTEC monitors discharge performance from each electrode in Tantec corona and plasma systems. It provides real-time treatment data, full traceability and easy transfer to a main PLC or data-logging device in production.
Dyne Test – Fast Surface Energy Measurement
Tantec DyneTEC test inks provide a quick process for measuring surface energy and wettability. The result helps verify whether a material is ready for reliable printing, coating, gluing or bonding for consistent results.
PlasmaLINE – Inline Vacuum Plasma Treatment
PlasmaLINE is a customized inline vacuum plasma system for medical devices. It delivers fast, uniform and repeatable surface treatment in 10–30 seconds, improving adhesion, biocompatibility and final product performance.
PlasmaTEC-X – Atmospheric Plasma Treatment
PlasmaTEC-X is a compact atmospheric plasma system for fast, uniform surface treatment. It integrates easily into production lines or robot cells and improves adhesion for gluing, printing, coating and painting in-line.
PlasmaTEC-X OEM – Compact Plasma Integration
PlasmaTEC-X OEM is a compact atmospheric plasma unit developed for machine builders and OEM integration. Controlled through I/O or BUS interfaces.
PlasmaTEC-X UR – Plasma Treatment for Cobots
PlasmaTEC-X UR is a certified atmospheric plasma solution for Universal Robots.
ProfileTEC – Plasma Treatment of EPDM Profiles
ProfileTEC provides plasma treatment of automotive EPDM profiles before flocking or slip-coating. Customized with one or more treatment heads, it improves adhesion at line speeds of up to 40 m/min for better output.
RotoVAC – Vacuum Plasma Treatment in a Drum
RotoVAC treats small injection-moulded parts in a rotating drum inside a vacuum chamber. Rotation exposes the entire surface of every part, delivering consistent plasma treatment without jigs or complex handling systems.
SpinTEC – Rotary Atmospheric Plasma Treatment
SpinTEC uses two rotating PlasmaTEC-X nozzles for uniform atmospheric plasma treatment with minimal heat impact. Treatment width can be customized from 40–150 mm, with speeds of up to 10 m/min for reliable inline output.
SpinTEC30 – Compact Rotary Plasma Treatment
SpinTEC30 is a compact, lightweight rotary plasma system with a 30 mm treatment width. Its belt-free direct motor delivers adjustable speeds from 70–2800 rpm and working speeds of approximately 25 m/min with less upkeep.
VacuTEC – Fast and Uniform Vacuum Plasma
VacuTEC provides uniform vacuum plasma treatment of injection-moulded parts. Available with one or more trays, it improves adhesion before coating, gluing, painting and printing, with cycle times of 2–120 seconds.
VacuTEC 2020 – Compact Vacuum Plasma Treater
VacuTEC 2020 is a compact vacuum plasma treater with a 200 x 200 mm tray. It delivers uniform treatment of injection-moulded parts and improves adhesion before coating, gluing, painting or printing with repeatable results.
VacuTEC 5050 – Versatile Vacuum Plasma Treater
VacuTEC 5050 provides fast and uniform vacuum plasma treatment of injection-moulded parts. Its two shelves offer an effective treatment area of 500 x 500 mm, with standard and customized systems available on request.
VacuTEC 8080 – Large Vacuum Plasma Treater
VacuTEC 8080 features an 800 × 800 mm treatment area and delivers fast, uniform vacuum plasma treatment. Standard or customized configurations improve adhesion before coating, gluing, painting and printing.
VacuTEC 100100 – Large-Capacity Vacuum Plasma
VacuTEC 100100 features a 1000 × 1000 mm treatment area for uniform vacuum plasma treatment. Telescopic shelves simplify loading, while customized configurations adapt the system to your process.
VacuTEC+ COAD – Precision Plasma Coating
VacuTEC+ COAD combines vacuum plasma cleaning with precursor activation to create an ultra-thin reactive layer. It delivers strong, stable adhesion on challenging materials without solvents, chemicals or primer at scale.
VacuLINE – Automated Inline Vacuum Plasma
VacuLINE is a customized vacuum plasma system for fully automated inline production. It delivers fast, uniform and repeatable treatment of injection-moulded parts before coating, gluing, painting or printing every cycle.
OzoneTEC – Internal Treatment of Hollow Parts
OzoneTEC treats the inside of hollow rotomoulded parts such as coolers, boats and jacket pipes. Ozone activates the inner surface before PUR foam injection, improving lasting adhesion, insulation and structural strength.
ZeroNOxTEC – Plasma Treatment with Less NOx
ZeroNOxTEC reduces NOx emissions from atmospheric plasma treatment by up to 99%. The plug-and-play system improves treatment width and efficiency, reduces ventilation demand and can extend treatment shelf life over time.
BottleTEC – 360° Surface Treatment of Bottles
BottleTEC provides complete, uniform corona treatment of plastic bottles and cylindrical containers. It improves adhesion of labels, inks and coatings and integrates into high-speed production lines in your process.
CableTEC – 360° Corona Treatment of Cables
CableTEC provides high-speed corona treatment of cable insulation made from PE, PP, PTFE and other polymers. The inline system improves adhesion of printing inks and coatings at speeds up to 600 m/min.
FoamTEC – Corona Treatment of Foam and Board
FoamTEC delivers uniform corona treatment of foam and boards up to 50 mm thick. Available for single- or dual-sided treatment.
HV-X Series – Advanced Plasma Power Generators
The HV-X series powers corona and plasma surface treatment systems with outputs of 200, 1000 or 2000 W and 2–80 kV. It supports PLCs, RTU Modbus and bus connectivity for flexible integration into modern production lines.
LabelTEC – Corona Treatment of Narrow Web
LabelTEC treats conductive and non-conductive narrow webs to improve adhesion of inks, glues and coatings. It provides single- or dual-sided corona treatment across widths of 100–500 mm at line speeds of up to 150 m/min.
LabTEC-X – Corona Treatment for Laboratories
LabTEC-X is a manual bench-top corona system for R&D, testing and proof-of-concept work. It treats small three-dimensional polymer parts and films, providing precise control in laboratory settings for reliable daily use.
NeedleTEC – Corona Treatment of Needle Hubs
NeedleTEC delivers inline corona treatment of plastic needle hubs to improve bonding and prevent leakage. It reaches recessed areas, supports high-speed assembly lines and can include electrode surveillance as an option.
PipeTEC – Internal Corona Treatment of Pipes
PipeTEC treats and cleans the entire inner surface of jacket pipes before PUR foam insulation. Integrated into extrusion lines, it improves adhesion, prevents air pockets and supports reliable pipe performance over time.
RotoTEC-X – Corona Treatment of 3D Parts
RotoTEC-X provides complete and uniform inline corona treatment of three-dimensional injection-moulded parts. Rotating electrodes improve adhesion before coating, printing, gluing or painting with precise output control.
SheetTEC – Corona Treatment of Sheets and Plates
SheetTEC provides single- or double-sided corona treatment of sheets and plates from 50–2000 mm wide. It improves adhesion and can be delivered as a stand-alone unit or integrated conveyor system for flexible production.
SpotTEC – Flexible Corona Treatment of 3D Parts
SpotTEC uses low-frequency discharge for targeted corona treatment of profiles, cables and moulded plastic parts. Its compact electrode head integrates easily into production lines without a counter electrode on demand.
SyrinTEC – 360° Corona Treatment of Syringes
Depending on the application, SyrinTEC provides internal or external corona treatment of PP and PE syringe barrels before printing or coating, improving adhesion on the treated surface.