Tantec LeakTEC solution is vital for diagnosis
Case Summary
Diagnostic system manufacturers depend on leak-free multi well plates to protect test accuracy and avoid contamination.
With Tantec’s LeakTEC system, unwanted holes and cracks are detected in milliseconds before the parts enter use.
Result:
✓ Detects holes below 3 microns
✓ Millisecond testing
✓ Reliable diagnostic quality
Conclusion:
A precise leak detection solution that helps secure safe and reliable medical testing.
Why Leak Detection Matters for Multi-Well Plates
Leak detection is vital for multi well plates for use in diagnostic systems. Tantec has just delivered a LeakTEC system to a manufacturer of diagnostic systems for analysis of diseases, including Covid-19.
The leak detection system's purpose is to detect unwanted holes in the multi well plates.
Without this type of detection even a small hole can have serious consequences to the integrity and reliability of the tests.
Leaking also results in machine down time for cleaning to ensure a sterile environment is maintained.
How LeakTEC Detects Pinholes Below 3 Microns
Tantec’s LeakTEC can detect pinholes smaller than 3 microns (0.003 mm).
This is achieved by introducing an electrical potential between a detecting electrode and an electrical ground. The electrical ground can be made of a metal jig or mandrel holding the part, while the plastic part itself acts as the insulator.
This detection takes place in milliseconds. In the event of detecting a crack or pinhole in the plastic material, an electrical contact is established between electrode and ground.
When this occurs the Tantec system sends a signal to the PLC or operator that a bad part is present.
Typical Medical Applications for LeakTEC
The most common applications the Tantec leak detection systems are used for are molded and welded joints in medical devices.
Parts like medical tubes, containers, pipettes, cannulas and extruded film for medical bags etc.
50+ Years of Tantec Leak Detection Experience
Tantec has over 50 years of experience in leak detection. Tantec’s ability to meet the many demands for leak detection of medical products is why the Tantec LeakTEC system is the preferred method used by medical device manufacturers.
Read case - Fully automatic leak detection system from Tantec makes a big difference for a customer